基本信息
标准名称: | 铝及铝合金化学分析方法 第24部分:稀土总含量的测定 |
英文名称: | Methods for chemical analysis of aluminium and aluminium alloys - Part 24:Determination of total rare earth contents |
中标分类: |
冶金 >>
金属化学分析方法 >>
轻金属及其合金分析方法 |
ICS分类: |
冶金 >>
有色金属 >>
铝和铝合金
|
替代情况: | 替代GB/T 6987.24-2001;GB/T 6987.32-2001 |
发布部门: | 中华人民共和国国家质量监督检验检疫总局 中国国家标准化管理委员会 |
发布日期: | 2008-03-31 |
实施日期: | 2008-09-01 |
首发日期: | 1988-02-25 |
作废日期: | |
主管部门: | 中国有色金属工业协会 |
提出单位: | 中国有色金属工业协会 |
归口单位: | 全国有色金属标准化技术委员会 |
起草单位: | 东北轻合金有限责任公司、中国有色金属工业标准计量质量研究、中国铝业股份有限公司西北铝加工分公司、北京有色金属研究总院 |
起草人: | 王俊峰、姚文殊、田永红、童坚、刘英、臧慕文等 |
出版社: | 中国标准出版社 |
出版日期: | 2008-06-01 |
页数: | 8页 |
计划单号: | 20061017-T-610 |
书号: | 155066·1-31675 |
适用范围
本部分规定了铝及铝合金中铈组稀土素总含量的测定方法。本部分适用于铝及铝合金中铈组稀土素总含量的测定。测定范围:(方法1)0.0010%--1.50%,(方法2)大于1.50%。 本部分代替GB/T6987.24—2001《铝及铝合金化学分析方法 三溴偶氮胂分光光度法测定铈组稀土元素总量》和GB/T6987.32—2001《铝及铝合金化学分析方法 草酸盐重量法测定稀土总量》。本部分与GB/T6987.24—2001相比主要变化如下:
———将GB/T6987.24—2001和GB/T6987.32—2001分别作为本部分的“方法一”和“方法二”;
———两个方法中均增加了“重复性”和“质量保证与控制”条款。
前言
没有内容
目录
没有内容
引用标准
没有内容
所属分类: 冶金 金属化学分析方法 轻金属及其合金分析方法 冶金 有色金属 铝和铝合金
Product Code:SAE J343
Title:Test and Test Procedures for SAE 100R Series Hydraulic Hose and Hose Assemblies
Issuing Committee:Hydraulic Hose And Hose Fittings Committee
Scope: This SAE Standard gives methods for testing and evaluating performance of the SAE 100R series of hydraulic hose and hose assemblies (hose and attached end fittings) used in hydraulic fluid power systems.Specific tests and performance criteria for evaluating hose assemblies used in hydraulic service are in accordance with the requirements for hose in the respective specifications of SAE J517.This document further establishes a uniform means of testing and evaluating performance of hydraulic hose assemblies.
Rationale: This SAE Standard gives methods for testing and evaluating performance of the SAE 100R series of hydraulic hose and hose assemblies (hose and attached end fittings) used in hydraulic fluid power systems.Specific tests and performance criteria for evaluating hose assemblies used in hydraulic service are in accordance with the requirements for hose in the respective specifications of SAE J517.This document further establishes a uniform means of testing and evaluating performance of hydraulic hose assemblies.